So What Is Flex MSE?

Flex MSE is a Cost Effective, Sustainable and Permanent –  Engineered Solution.

The Flex MSE  Vegetated Wall System uses the same globally accepted principles of Mechanically Stabilized Earth (MSE) that builders rely on for making massive  retaining walls.

Geobag walls have been built as high as 75ft, with great success. Our Second Generation interlocking Plate is a 100% recycled, recyclable component which adds increased geogrid compatibility and friction strength over its precursors.

Flex MSE is a unique soft building material that exhibits hard material qualities.  It weathers events that would ruin other systems, and only gets stronger and greener as time goes on.

Cost Effective:

• Flex MSE is 60% of concrete’s cost installed.
• Flex MSE is a simple two component system that often installs in half the time of concrete block walls.
• No specialized equipment, labour, cranes, forms, footings, or rebar.

Sustainable:

• Flex MSE walls require minimal initial leveling or subgrade embedment.
• The flexible, easily adjusted units conform perfectly to trees and unexpected bedrock
• Flex MSE is a recycled, non-toxic product that conforms to LEED (Leadership in Energy and Environmental Design) qualifications.
• Flex MSE vegetated walls are graffiti proof.
• Flex MSE installations use 97%  less Green House Gases (GHGs) over comparably sized concrete blocks.

Permanent:

• Flex MSE lasts almost twice as long as concrete (120 year ASTM System Life rating).
• A light weight soft armour product that integrates easily with other proprietary systems and has  great performance in limited access, tough or unstable terrain.
• Settlement and water ruin concrete walls.  Flex MSE has a very high settlement tolerance and excess water drains through the system.  The drainage aspect eliminates the need for chimney drains and pipe behind the wall, while feeding the vegetation.

Bottom line? Flex MSE  is a Green solution that installs faster, lasts longer, looks completely natural, and costs less. For a truly Green solution without the Green ‘premium’, choose Flex MSE  for retaining walls, slope stabilization, erosion control, site reclamation, and ‘Anywhere Land Meets Water.’

The post In the market for a retaining wall? appeared first on Textured Terrain.

The life expectancy of concrete is many many years if maintained properly.   But when it does eventually deteriorate, and you decide its time to do something about it.  Think wisely about getting the cover up type fix.  Many homeowners are lured into these other materials that will cover ugly concrete, and as a bonus are quite cheaper.  Don’t be fooled, it will cost you more in the future.  Now you’re in a situation that your having to remove the cover up material as well as the concrete underneath, in turn costing a lot more.  

Many times, concrete needs to be replaced due to cracking.  In most cases, the cracking is due to the earth/ground shifting under it.  This is due to low or high moisture levels, unexpected heavy traffic etc.   While it sounds great covering those cracks or ugly concrete with a much more cost effective product like asphalt or rubber paving etc, remember that the underlying problem is still there.

Remember, your finished product is only as good as the preparation underneath it!   There is a reason why Concrete are 99% of residential driveways in Canada.  It is Tried, Tested, and True.    #yqr #reginaconcretecontractor

The post The classic Driveway “Cover up” appeared first on Textured Terrain.

Water, water, water (and water again)

Keeping your new lawn well-watered is imperative in the first month so the sod takes root and flourishes. Water it immediately after installation to the point of being spongy and then regularly in the following weeks. The amount of times you should water your new sod is up for debate and will depend on factors like temperature, weather and amount of sun your grass gets. It’s a good rule of thumb to water it twice a day for week one, once a day for week two, every other day for weeks three and four, then resume a regular watering schedule. Watering a little less every week will help your sod develop deep, healthy roots. Just be sure not to overwater as it can result in shallow roots or stop air from reaching the roots.

Please stay off the grass

Try to keep your family and pets off the new sod for at least two weeks after installation and only go on it to do the care and maintenance needed. Give your new sod a chance to get used to its new home and develop a strong root bed without any interruptions.

Mow mowing, mow problems

Don’t over mow your new lawn. Wait at least a week after your sod has been laid before mowing for the first time and don’t cut your grass shorter than 3 inches. Keeping your grass a little longer gives your lawn a lush look, helps retain water and helps your grass choke out invasive weeds like dandelions, clover and crabgrass. Be sure to watch your mower wheels the first time you cut to make sure they don’t get caught in the seams between sod panels.

When to fertilize

You shouldn’t fertilize your new lawn for at least six weeks after installation. Wait until week six or seven to spread fertilizer, if needed. Then resume a regular lawn fertilizer schedule. You shouldn’t need to fertilize your lawn until fall, when you would usually fertilize.

The team at Textured Terrain can help you make the most of your yard. Contact us today.

The post Keep Your New Grass Green appeared first on Textured Terrain.